HYDRAULIC GANTRY CRANES MQ-PH-30

A framework called armature, which forms the gantry body in the true sense of the word, slides between two parallel supporting pillars.

This armature includes two crane booms that suitable attached serve as support to the load carrier assembly. Two lifting partial movements are achieved by this: One resulting from the vertical movement of the armature through the pillars, the other being the vertical displacement of the suspended load at the end of the crane boom respecting its spin axis.( 45º at each side) ...




UNLOAD PRODUCT INFORMATION

TECHNICAL CHARACTERISTICS

ENGINE:

DEUTZ F4L912 POWER
82 cv AT 2400 r.p.m.
(AIR COOLED DIESEL)

HYDRAULIC PUMP DENINSON T6C-022

PRESSION 180 Bars
FLOW 160 l / Min

DISTRIBUTOR:

DANFOSS PVG 120, 8 BODIES and MANUAL ACTIVATION

AUXILIARY ENGINE GROUP:

GASOLINE, 5 CV AT 3000 R.P.M
PUMP=DISPLACEMENT 2 CM37REVOLUTION

LIFTING SYSTEM:

LIFTING CAPACITY: 15 TONS
LIFTING SPEED: 10,6 METROS/ MINUTE
TOTAL LIFTING RUN: 3,6 METRES
CRANE BOOM LIFTING RUN: 2 METRES

TRAVELLING SYSTEM:

BY MEANS OF TWO HYDRAULIC ENGINES IN EACH GANTRY, TYPE ORBITAL. INCREASINGLY FROM 0 TO 18 KM/HOUR AT MAXIMUM SPEED AND WITH GRADIENT SPEED: 0-18 Km / HOUR GRADIENT: Up to 2,5 %

LOAD CENTRED:

0,2 m each side

BRAKE SYSTEM:

BRAKES: HYDRAULIC BRAKES APPLIED ON TWO NON DRIVEN WHEELS PARKING BRAKE.

TRACK GAUGE WORKING AREA:

3,5 m (DIFFERENT TRACKWIDTHS ON REQUEST)

ELECTRICAL SYSTEM:

12 Volts, Contact key Start.

TOTAL WEIGHT (Each gantry):

8000 kgs

MAIN DIMENSIONS:

LENGTH: 2.62 m
WIDTH: 3.65 m (Perpendicular to the track axle)
HEIGHT: 3,10 m (Folded gantry) 4,42 m ( Unfolded Gantry)